SALE
DroneAnt4™ Quad Drone Antenna Set for Quad-Antenna Drone Controllers
The DroneAnt4™ by WirEng® is a high gain directional antenna set dedicated to significantly enhance your quad-antenna drone range capabilities, for significantly increased range, reliability, operational stability, battery life, sensitivity to external interferences, and daily environmental factors that make range and stability change unpredictably.
The DroneAnt4™ by WirEng® can also be used in mission-critical situations where RF interferences may cause losing control of your drone, or simply when your drone operating range is not enough to satisfy your purposes.
The DroneAnt4™ by WirEng® is splash proof and can therefore be used on boats and under severe weather conditions such as heavy rain, snow, etc. The primary purpose of the DroneAnt4™ by WirEng® is to significantly increase your drone operational stability, however, the DroneAnt4™ is also recommended to stabilize your drone maneuverability because it will provide your drone with a very strong and reliable signal at any height, heading, and operating distance, with possibly a longer battery life as an added benefit, since the drone's transmitter won't have to operate at maximum transmit power when far away from the controller.
The DroneAnt4™ by WirEng® is truly compatible with the vast majority of drones, because it supports all drone frequencies and modes of operation. The DroneAnt4™ set is made for quad-antenna drones, such as DJI drones. For maximum efficiency, we recommend modifying your quad-antenna controller to have four RF connectors on it, or you can purchase one of our our Drone Controller Interfaces, which require no hardware modifications and no installation. If you have any questions çç
The DroneAnt4™ by WirEng® includes WirEng® extended 2-year warranty at no extra charge. Utility and Design Patents pending.
Main Features
- The DroneAnt4™ replaces the small internal drone controller antennas with four powerful WirEng® antennas, with enhanced directivity and gain thanks to WirEng®'s MixPol™ technology, without the need of any hardware modification when employed with our non-invasive controller interfaces (not included).
- The DroneAnt4™ fully supports the drones Automatic Frequency Hops (AFH) on all required bands.
- The DroneAnt4™ fully supports Frequency Hopping Spread Spectrum (FHSS) modality featured by most drones.
- The DroneAnt4™ also fully supports the anti-jamming frequency hopping technology, if featured by your drone.
- The DroneAnt4™ will increases your drone reach, helping you obtain longer distances and increased stability and reliability.
- The DroneAnt4™ will also likely enhance battery life, since the drone won't have to transmit at maximum power when far away from the controller.
- The DroneAnt4™ includes 100% marine-grade stainless steel arms and backplates, made to withstand mission-critical situations and every possible weather condition.
- Each DroneAnt4™ component is categorized as semi industrial grade (anti-UV ABS, splash-proof, and stainless steel backplate).
- Each DroneAnt4™ element has a 24K gold plated N-Connector on its radome, for maximum efficiency, reliability, and power transferring.
- The DroneAnt4™ has an extended operating temperature of -25° to +85° C, for use in virtually any possible environment and weather condition.
- The DroneAnt4™ has has a high input/output power of up to 250 W continuous, 350 W peak (more than many times what's usually needed).
- The DroneAnt4™ is strong and durable, for use even in difficult situations and environments.
- The DroneAnt4™ has an IP67 rating (protected against dust, strong water jets, and water waves).
- The DroneAnt4™ has a UL94 V-0 flammability rating
- The DroneAnt4™ has USA and International trademarks current, and utilities and design patents pending.
The pole shown in the photos is shown as an application example and it's not included with this set.
Important: Cables are not included. If you need coaxial cables, please click here
To connect with your controller, you may modify your controller or, if your controller is the DJI RC Pro or RC Pro Enterprise, you may purchase our non-invasive, slide-on signal interface, called the ExtAnt™.
Please contact us mentioning your drone brand and model and we will assist you in connecting the DroneAnt4™ to your controller.
Proudly made in the USA with domestic and imported components.
Buy with confidence! The DroneAnt4™ comes with WirEng®'s extended two-year all-encompassing manufacturer warranty at no extra cost to you!